Tin Oxide Rods

Standard Diameters: 38mm, 64mm, 82mm, 88mm, 100mm, 120mm, 125mm, 150mm, 160mm, 17 mm, 200mm. (A maximum length of 650mm for a single rod - smaller for smaller diameters)
Other non-standard sizes can be manufactured on request and all electrodes may be manufactured with hemispherical or flat surface at the hot (glass interface) end.
Suitable to temperatures in excess of 1780 degrees C (* depending on connecting method)

Tin Oxide Rods

Glassworks manufacture all types of connector system for the Rod electrodes and can advise of the most suitable for the relevant application. All connectors are individually matches to each electrode based on tolerances in order to achieve the best possible electrical connection.

Connector types for block type electrodes

Include the Lateral Plug, Metallic plug, back face and silver rod connectors. Water/ Air cooled pot connectors and the GWE electrode Advancing System.

The position of the electrodes, the current density applied and the connector type are all critical factors in obtaining best results.

Lead Crystal Glass

Optical and ophthalmic Glasses

TFT and PDP Glass

Specialty Glasses

Forehearths and refiners.

Conventional Boosting

Suitable to temperatures in excess of 1780 degrees C (* depending on connecting method)

Every electrode is individually made, numbered and tested and inspected to the highest quality specifications prior to approval and eventual dispatch. Glassworks stores all quality control data and is available to customers as required.

Get A Quote
No matter how big or small, get in touch with us and see what we can do for you.
Enquire now

Glassworks Hounsell Limited, Registered Office: Park Lane, Halesowen, West Midlands, B63 2QS | Registered Company Number 00371181